Lithium batteries as a source of power for various smart devices, how is it detected and screened? How can you ensure that the lithium battery must be qualified?
The answer is Formation capacity!
The chemical component of the lithium battery cell is to achieve the initial initiation of the battery by charging and discharging, so that the active substance of the cell is activated, which is a process of energy conversion. The chemical composition and capacitance principle of lithium cell is more complex, but it is also a very important process that affects the performance of the battery.
The capacity of lithium-ion battery pack: simple understanding is capacity sorting, performance screening and classification. That is, through the “full charge – discharge” cycle of the battery, the cycle time multiplied by the discharge current is the capacity of the battery. As long as the capacity obtained by the test meets or exceeds the design capacity, the battery is qualified.
Formation is the lithium-ion battery pack has just been produced, to do a charge, in order to activate the battery, its use is similar to the “formatting” of a floppy disk. The battery can be charged and discharged normally only after the formation is complete.
Battery component capacity in one machine
As a device for activating and testing whether the battery is qualified, the connector selection of the chemical component container determines whether the device can be used effectively for a long time. Countless charges and discharges affect the life of the chemical component container and indirectly determine the quality of the connector. The Amass LCB60 series connectors in the Amass solution provide exclusive and reliable current-carrying connections during the charge and discharge of the AMASS capacitor.
What are the characteristics of Amass LCB60 serialized component capacitance connectors that can match the performance requirements of component capacitance devices? Its characteristics are as follows:
1. high current low temperature rise
Amass LCB60 series current covers 55-110A, meet the current requirements of most charge and discharge equipment, its normal temperature rise in 4 hours is less than 30K, through 500 hours of thermal cycle test, reduce the heat loss of chemical components during charge and discharge process, reduce the failure rate caused by high temperature rise, extend the service life of the equipment.
2. One-stop selection of full category application
If you are still looking for polarity, lack of internal space and functional connectors trouble, Amass LCB60 series one-stop solution to all your troubles
LCB60 Series
1. Single PIN/ double PIN/ three PIN/ mixed polarity for you to choose, can be used in battery, motor, controller and other machine applications and components applications.
2. Wire/plate/wire plate combination, whether you are welding wire or welding plate, the minimum size is only the size of the knuckle, and the horizontal space is insufficient or longitudinal space is insufficient can be combined installation.
3. Waterproof/flameproof/standard to meet the different use environments of your equipment, whether indoor or outdoor applications, can be included.
Post time: Jun-10-2023