Products

  • LFB40 High Current Waterproof Connector(Presell)

    LFB40 High Current Waterproof Connector(Presell) / Electric Current:25A-45A

    Amass fourth generation LF waterproof connector low temperature rise, long service life, can work in the high and low temperature environment of -40℃-120℃, IP67 protection level can keep the connector inside dry in bad weather conditions, effectively prevent moisture infiltration, ensure the normal work of the circuit, to avoid electric car short circuit, damage phenomenon.

  • LCB40PW High Current Connector

    LCB40PW High Current Connector / Electric Current:30A-67A

    LC series connectors adopt crown spring mother-holder connection mode and realize effective current-carrying connection through inclined inner arch bar elastic contact structure. Compared with XT series, LC series connectors have three times full contact, effectively dealing with the problem of large current fluctuation range under the operating condition of intelligent equipment. The same load current, the connector low temperature rise control; Under the same temperature rise requirement, it has larger current-carrying output, so as to realize the requirements of large current-carrying for safe transmission of the whole equipment.

  • XLB16 With Side Wing Snap Connector(Presell)

    XLB16 With Side Wing Snap Connector(Presell) / Electric Current:20A

    The new national standard for electric vehicles references GB/T5169.11-2017 Electric and Electronic Products Fire Hazard Experiment Part 11, which was formally implemented on 2023-7-1.The scorching wire test temperature of PA6 material used in XT is 750°C, while the scorching wire test temperature of PBT material used in XLB30 and XLB40 is 850°C, which is a 13% enhancement of the capacity, and the safety is more guaranteed.

  • LCB40PBHigh Current Connector

    LCB40PBHigh Current Connector / Electric Current: 30A-67A

    With the increasingly high performance requirements of intelligent equipment, the current must be larger and larger under the rated voltage; With portability, there is less room for power batteries and connectors. In increasingly complex application scenarios, the risk of current overload is further increased. “Large current, small volume” has become the core research and development of power connectors. LC series is a new generation of high-performance connectors customized for intelligent devices. Through seven technological upgrades, the advantages of “large current and small volume” are further upgraded, while enhancing anti-seismic anti-peeling and efficient current-carrying to cope with more complex operating conditions of intelligent devices.

  • XLB30 With Side Wing Snap Connector(Presell)

    XLB30 With Side Wing Snap Connector(Presell) / Electric Current:30A-35A

    Compared to the XT, which is made of PA6 material, its long-term operating temperature range is -20~100℃; while the XL series is made of PBT plastic shell material, its long-term operating temperature range is raised to -40~140℃, which is able to continue to work stably under the extreme temperature environment, and improves the product’s environmental adaptability.

  • LCB50 High Current Connector

    LCB50 High Current Connector / Electric Current:40A-98A

    Due to the continuous iteration of intelligent devices, the complexity of devices is getting higher and higher, and the application scenarios are getting wider and wider, which puts forward higher requirements for current transmission and product performance. And the special structure of the crown spring, when the terminals encounter vibration and impact, still maintain sufficient diversion contact area, effectively avoid the instantaneous diversion surface becomes small, bring current overload, leading to the serious problems of connector aging, machine burning, equipment damage.

  • XLB40 With Side Wing Snap Connector(Presell)

    XLB40 With Side Wing Snap Connector(Presell) / Electric Current:35A-45A

    XL series and the PCB surface drop ≥ 1.6mm, the center distance and the size of the soldering feet and XT to maintain consistency, increase the positioning holes to prevent dorking, the snap part of the drop design will not affect the layout of the end of the board, to ensure that the installation process is smooth and unobstructed.

  • LCB60PB High Current Connector

    LCB60PB High Current Connector / Electric Current:55A-110A

    Amass LC series power inner connector crown spring contact structure, not only long service life, when the male and female plug, effectively eliminate the occurrence of instantaneous break, and the current covers 10A-300A, suitable for different power clean small household appliances. Amass LC series power internal connector has IP65 protection grade, can completely prevent foreign objects and dust invasion, can also prevent jet water immersion, mostly used in the use of harsh environment and outdoor intelligent equipment inside, and for cleaning small household appliances such as easy to wade into the water and dust, LC series power internal connector is a good choice!

  • LCC40 High Current Connector

    LCC40 High Current Connector / Electric Current:30A-67A

    The new generation of high-performance LC series can meet the power connection requirements of various smart devices, especially for mobile smart devices in the application scenario of “large current and small volume”. LC series can be widely used in a variety of smart devices except smart cars and mobile phones. Such as: model UAV, garden tools, intelligent mobility scooter, intelligent electric vehicle, intelligent robot, intelligent home, energy storage equipment, lithium battery, etc. Especially in the field of intelligent devices with mobile properties, LC has an irreplaceable position in the industry by virtue of its product characteristics and advantages of “large current and small volume”.

  • LCC40PB High Current Connector

    LCC40PB High Current Connector / Electric Current:30A-67A

    The new generation of LC series adopts new copper material. The conductivity of LC copper material and XT brass material is 99.99% and 49% respectively. According to the test and verification of Ames Laboratory, the conductivity of new copper is + 2 times that of brass under the same cross-sectional area. Amess chose copper with high purity and high conductivity as the material of contact parts. Along with the substantial increase of current carrying density, it not only brings excellent conductivity, but also ensures that LC series still maintains the obvious advantage of small size after a substantial upgrade.

  • LCC40PW High Current Connector

    LCC40PW High Current Connector / Electric Current:30A-67A

    In order to cope with mobile smart devices such as lawn mowers, drones, and smart electric vehicles, the connector connector may become loose during vibration when moving or working.The phenomenon of Amass LC Series connectors are specially designed for “Strong lock” construction. This structure, using the straight insert design, when the matching is in place, the lock lock automatically, self-locking force is strong. At the same time, the design of the buckle, so that the product has high seismic performance, can easily cope with the high-frequency vibration within 500HZ. Avoid high frequency vibration caused by falling off, loose, to avoid the risk of breaking, poor contact and so on. And the locking structure also strengthens the sealing property of the product, which has a good auxiliary role for dust and waterproof.

  • LFB30 High Current Waterproof Connector(Presell)

    LFB30 High Current Waterproof Connector(Presell) / Electric Current:20A-35A

    Amass new generation LC products adopt 6 square stamping and riveting mode, the process equipment is simple, the process is relatively easy to control, the quality is stable, the connection environment requirements are low, can be operated quickly in the wind and water environment, greatly improve the efficiency of processing and equipment maintenance, and the riveting structure is resistant to vibration and impact, the connection is firm and reliable. Aircraft are riveted. Under the test of high altitude, high speed and high pressure, riveting mode can effectively avoid the fracture risk brought by welding and ensure the safety and stability of the connection.